Fence Clip Bracket Hanger for Wood Rail

Fence Clip Bracket Hanger 1-9/16" W x 2-3/4" H for 2" X 4" Fence Rails

Galvanized Steel Fence Bracket Hanger for connecting 2x4 fence rails with fence posts. Make construction easier and more convenient, saving time and labor cost.

Features

The package contains 200 pieces of the product

Material: Steel

Finish: Galvanized

Guage: 22

Dimensions: 1-9/16" W x 2-3/4" H Designed to fit standard 2" x 4" (actual size 1.5" x 3.5") Fence Rails

Hardware (screws/nails) NOT included.

G90 Standard Connector Coating

Galvanized G90 steel is coated with .90 oz. of zinc per square foot of surface area. This coating offers the least amount of corrosion resistance amongst the different coatings available. Although G60 galvanization is the minimum coating standard, Almcan connectors are predominantly manufactured with G90 galvanized steel.

Galvanized gang nail plate

Galvanized gang nail plate is also could be called truss connector plate.A truss connector plate is a kind of tie. Truss Plates are light gauge metal plates used to connect prefabricated light frame wood trusses. They are produced by punching light gauge galvanized steel in order to have teeth on one side. The teeth will allow to join different trusses together by being embedded into the lumber using an hydraulic press or a roller.

Nail plates are used to connect timber of the same thickness in the same plane. When used on trusses, they are pressed into the side of the timber using special hydraulic tools. As the plate is pressed in, the nails are all "driven" simultaneously and the compression between adjacent nails reduces the tendency to split.

A truss connector plate is manufactured from ASTM A653/A653M, A591, A792/A792M, or A167 structural quality steel and is protected with zinc or zinc-aluminum alloy coatings or their stainless steel equivalent. Metal connector plates have integral teeth and are manufactured to various sizes (that is, length and width) and thickness or gauges and are designed to laterally transmit loads in wood. They are also known as stud ties, metal connector plates, mending plates, or nail plates. However, not all types of nail plates are approved for use in trusses and other structurally critical placements. 

Joist hanger,truss hanger

Joist hangers represent a critical design component that helps ensure a building's structural integrity. When factoring in load requirements, member size and costs, deciding on the best solution can be a daunting process. The Joist Hanger Selector from SUREALONG makes selecting the most cost‑effective hanger based on the type of installation, options and loads easier than ever.