Consumer FAQ for Garden Bed Corner Bracket 9 inch

Publish Time: 2021-08-12     Origin: Site

Garden Bed Corner Bracket

9" in height, 3"x3" formed corners

Beautiful Rust color blends well with your outdoor projects

Attractive, rust-resistant, powder-coated steel

Set of 4 brackets, will fit any shape with right angles

Hardware included (8 screws per bracket)


Question:Can these be placed on the inside of the boards so they do not show?

Answer:Yes


Question:who would not want radius corners on a bed?

Answer:This is meant for vegetable/flower raised bed construction outdoors with treated lumber as tha sides. The squared brackets connect the squared off lumber sides. A radius finish would add un necessary cost

However there are several decorative styles available from other garden store outlets. Hope you find what you need


Question:Are these garden brackets rust proof? I don't want them falling apart in a couple of years.

Answer:yes,they are rust proof in 5 years


Question:How thick is this hot rolled steel material?

Answer:These are made from 14 gauge HR.


Question:How far are the screw holes from the outer edge of the brackets?

Answer:3/4" from the edge, about 2 1/4" from the corner. I measured from the middle of the screw


Question:Using 2 x lumber. The brackets look 3" wide. Is there enough room for the screw on the one side of the bracket that 2" is already taken up?

Answer:I built my raised garden bed using

8' long 2' tall x 1 1/2" thick planks. The brackets worked great and still look good. I screwed the brackets into the side of the planks. So I guess you would have an inch clearance? I checked mine this morning and while mine have a bit more room, everything still looked secure.



Question:What size and type of lumber did you use?

Answer:For me, untreated pine due to availability and cost, but I knew it won't last more than a few years. My raised bed is 4x10. I think about a good foot tall. Really, you can use anything that you wish. I think my wood is about 1 1/2 inch thick. It was very easy to put together!

 

Question:Are they heavy duty, & can be used in the construction of a Chicken coop?

Answer:Yes, yes, extremely heavy duty. We built large flower beds with these corner brackets and attached them to small railroad ties. They are holding up beautifully... Highly recommend them.

 

Question:Are these more brown in color or black ?

Answer:They are brown, and quite handsome as you can see from my raised-bed garden. Also extremely sturdy; worth the money as I expect to use this garden box for years.

 

Question:I want to use different screws. What size screws will fit the holes? I was looking at 1/4-20 x 1.

Answer:M5*30


Contact us

OEM Sheet Metal Fabrication Solutions for Custom Industrial Components

Custom Fabricated Steel Parts for Industrial Manufacturing Systems

Precision Fabricated Metal Parts with Laser Cutting and Bending Service

OEM Metal Sheet Components for Machinery Structural Applications

Custom Industrial Sheet Metal Fabrication Parts for Engineering Projects