Email: info@cangzhoufutong.com      Phone: +86-10-87338783

FAQ Category

Garden bed corner brackets

  • Q Can this item be bent? I have pre-existing raised garden beds with angles other than 90 degrees.

    A
    From my experience putting it together, there is some flexibility for about 1/4" of bend in case your corners are not quite square, but not more than that. These are very sturdy and very rigid.

  • Q Can you use just 4 corners for a 5 ft. x 10 ft. long bed?

    A We did a 4x8 ft bed, but put a 2x12 in the middle for added support. I think you can do it, but would put a support piece in the middle so it won't bow out (presuming you are making a garden bed & filling it with dirt.

  • Q can I use this for 1" thickness wood?

    A Best if used on 2” wood stock.

  • Q Garden Bed Corner Bracket - Set of Four - 20-24 Inch Bed

    A
    Question:Do you have a vesion with more holes for 2x6 lumber? (4 boards high) What gage is the steel?
    Answer:Yes,we have
    Question:Any rusting potential with these?
    Answer:the guaranty time is 5 years
    Question:What are the size of the screw holes?
    Answer:Don't worry,the screws came with the brackets.
    Question:are there matching flat side brackets, to keep 10 ft lengths of 3 stacked 2x6s from bowing? Or not needed?
    Answer:It is unnecessary for flat side brackets
    71JT06SSMCL._AC_SL1500_

  • Q Set of 4 Raised Garden Bed Corner Brackets for 10"-12" Bed

    A
    Question:are these for true 2" boards, or Milled 2" boards (which are actually 1 1/2 inch) ?
    Answer:Milled - 1 1/2”
     
    Question:Would I be able to adjust the angles on these? Trying to build hexagon beds, so the angles would not be 90...
    Answer:No, they are quite stout and at 90 deg.But we can do the hexagon brackets if you have a design drawing
     
    Question:Are these black or more brownish in color?
    Answer:They are a bronze-brown, not black.
    71JT06SSMCL._AC_SL1500_

  • Q Garden Bed Corner Bracket - Set of Four - 10-15 Inch Bed

    A
    Question:Can these be placed on the inside of the boards so they do not show?
    Answer:Yes
     
    Question:who would not want radius corners on a bed?
    Answer:This is meant for vegetable/flower raised bed construction outdoors with treated lumber as tha sides. The squared brackets connect the squared off lumber sides. A radius finish would add un necessary cost.
    But we also could do the brackets if you supply a design drawing a sample to us.
     
    Question:Are these garden brackets rust proof? I don't want them falling apart in a couple of years.
    Answer:Yes,the surface is finished with powder coating to anti rust.
     
    Question:How thick is this hot rolled steel material?
    Answer:These are made from 14 gauge HR.
Cangzhou Futong is a full-service sheet metal fabricator that uses lean manufacturing tools and focuses on continuous improvement to give you the best results. From traditional metal fabrication services to 3D laser welding and rapid prototyping,Cangzhou Futong is your one-stop-shop for sheet metal projects from conception to production.

PRODUCT CATEGORY

GET IN TOUCH

Contact us
Copyrights  2007-2023 Cangzhou Futong Precision Manufacturing Co., Ltd. All rights reserved